Fingertrip Pulse Oximeter MD300C15D

Add to wishlistAdded to wishlistRemoved from wishlist 2
Add to compare
  • -LCD display SpO₂, PR, and Pulse bar
  • -Low power consumption; battery-low indication
  • -2pcs AAA-size batteries
  • -Automatically power off

Instructions For Use

  • Open the battery compartment cover, install the No. 7 battery according to the positive and negative signs in the battery compartment, and close the battery compartment cover
  • Pinch the clip, insert the finger under test into the rubber hole, release the finger, and press the key on the panel.
  • Try not to shake or move during use, after the result is displayed, read the data on the screen


  1. When using the product for measurement, keep your body as still as possible
  2. During blood oxygen measurement, the same arm should not be tested for blood pressure at the same time; when the peripheral circulation of the subject is severely poor, it will lead to a decrease in arterial blood flow at the measured site, making the measurement inaccurate or impossible measuring
  3. When using the product for measurement, avoid strong light shining on the measuring probe; when the outside has strong light shining on the probe, the operation of the photoelectric receiving device may deviate from the normal value range, resulting in inaccurate measurement, so strong light irradiation should be avoided
  4. For patients with severe anemia, the oximeter measurement does not have clinical significance, that is, if the user is a patient with severe anemia and there is anemia hypoxia, the measured blood oxygen value may be displayed as normal

Specification: Fingertrip Pulse Oximeter MD300C15D

Application Range

Adult and pediatric


Measurement range: 70%-100%

Pulse Rate

Measurement range: 30-250bpm


Type OLED Parameters: SpO₂, PR,Pulse bar Mode : 2 display modes

Power Requirements

Two AAA-size batteries

Fingertrip Pulse Oximeter MD300C15D
Fingertrip Pulse Oximeter MD300C15D
Enable registration in settings - general
Compare items
  • Total (0)