Vital Signs Monitor MD2000C

Add to wishlistAdded to wishlistRemoved from wishlist 4
Add to compare
  • -Clear 7” color display with large easy read information
  • -Lightweight and portable with weight less than 2kgs
  • -Complete an ear temperature reading in less than or equal to 5 seconds
  • -Complete a SpO₂ and PI reading in less than or equal to 30 seconds
  • -Measures NIBP in 60 second as the cuff inflates
  • -Finish single patient measurement in about 60 seconds
  • -200-reading memory

Instructions For Use

  • Open the battery compartment cover, install the No. 7 battery according to the positive and negative signs in the battery compartment, and close the battery compartment cover
  • Pinch the clip, insert the finger under test into the rubber hole, release the finger, and press the key on the panel.
  • Try not to shake or move during use, after the result is displayed, read the data on the screen


  1. When using the product for measurement, keep your body as still as possible
  2. During blood oxygen measurement, the same arm should not be tested for blood pressure at the same time; when the peripheral circulation of the subject is severely poor, it will lead to a decrease in arterial blood flow at the measured site, making the measurement inaccurate or impossible measuring
  3. When using the product for measurement, avoid strong light shining on the measuring probe; when the outside has strong light shining on the probe, the operation of the photoelectric receiving device may deviate from the normal value range, resulting in inaccurate measurement, so strong light irradiation should be avoided
  4. For patients with severe anemia, the oximeter measurement does not have clinical significance, that is, if the user is a patient with severe anemia and there is anemia hypoxia, the measured blood oxygen value may be displayed as normal

Specification: Vital Signs Monitor MD2000C

Application Range

Adult and pediatric


Measurement range: 70%-100%

Pulse Rate

Measurement range: 30-250bpm


Measurement range: 0.2%-20%


Method: Oscillometric
Operation modes: Manual/Automatic/STAT
Measurement unit: mmHg/kPa selectable
Measurement Types:Systolic, diastolic, and mean
Over-pressure protection:Yes
Resolution: 1mmHg

Data Transmission

USB or wired LAN or wireless LAN


Alarm: NIBP, SpO₂, PR, probe off, finger out, Low voltage
Modes:Visible & 3-level audible alarms, Error code


Spot-check mode: 200 records
Continuous mode: 72 hours


Type:7” color screenParameters:NIBP, SpO₂, PI*, PR, pulse barwaveform




NIBP(SYS, DIA, MAP) ,SpO₂, PI, PR, pulse bar, waveform


Protection Class:
Type BF defibrillation proof
Protection against moisture:IPX1
Safety:IEC 60601-1

User Reviews

0.0 out of 5
Write a review

There are no reviews yet.

Be the first to review “Vital Signs Monitor MD2000C”

Your email address will not be published. Required fields are marked *



Enable registration in settings - general
Compare items
  • Total (0)